7 Reasons to Replace Your Furnace | Furnace Replacement Brooklyn Center

Furnace Replacement Brooklyn Center with Rheem Quality Gas Furnaces. The average furnace lifespan can vary between 15-20 years. If you have an old inefficient unit and been holding off on replacement, it may be costing you more money in the long run. Today we’ll take a look at 7 of the most common reasons to replace your furnace with an

  1. Age of Your Furnace: The average gas powered forced air furnace will last between 15 and 20 years if the owner has taken proper care of the unit. If your furnace is within that age range or if it is older, be a proactive homeowner and replace the furnace before it breaks down at an untimely time this winter.
  2. Cracked Heat Exchanger: Many people are confused when they are told that the furnace must be replaced when the heat exchanger is found to have a crack in it.  A cracked or rusted out heat exchangers is a known cause of carbon monoxide leaks in the home. Running a unit with this problem could have severe consequences.
  3. High Energy Bills: One thing every homeowner can expect this winter is a rise in the cost of gas to heat your home. If you are running an old inefficient unit, that could mean a big increase in your energy bills as well. Lessen the blow by replacing that old unit with a new high efficiency Rheem Furnace Replacement Brooklyn Center. You could save around 30% on your heating bills this winter!
  4. Go Green: Taking care of our planet is everyone’s responsibility. If you are running a unit that is only 65% efficient of less, your home is wasting tons of energy every year. Reduce your carbon footprint and do your part to help the environment by installing a new high efficiency furnace in your home today!
  5. High Repair Costs: If the unit that you currently have is in disrepair, the repair costs to the unit may not be worth it. Why invest hundreds of dollars in repair now when that old unit may not last much longer anyways?
  6. Flooded Basement: Thousands of homes experiences flooding this past summer, and as a result, the furnace may have undergone some water damage. If this happened to you, don’t put off replacing the unit any longer! Attempting to run a water damaged furnace can lead to unexpected system failure, carbon monoxide leaks, and electrical fires.
  7. Unpredictable Heating: If that old furnace isn’t evenly heating the home, a new high efficiency unit may solve all of your problems! The new Rheem technology on the market today increases comfort and reliability of your heating system. Don’t be left out in the cold this winter!

Rheem Quality Gas Furnaces are designed to deliver reliable and economical warmth. Rheem is a partner with ENERGY STAR®. Products with the ENERGY STAR® label are the most energy efficient choices you can make as a consumer. Contact All Climate Mechanical today for a free estimate on a new furnace and be on your way to a warm and comfortable winter.

Furnace Replacement Brooklyn Center | All Climate Mechanical | Trusted Rheem Contractor

Give us a call at 763-548-8095 for emergency service or to schedule a visit from an All Climate Mechanical Technician for your Furnace Replacement Brooklyn Center.

Furnace Filter Brooklyn Center | Heating Service Brooklyn Center | All Climate Mechanical

Furnace Filter Brooklyn Center and why it matters to keep it clean. With spring starting on the 20th of March this year its time to look at a few inexpensive furnace maintenance tips. Would you like to increase your furnace efficiency by up to 15 percent? According to the U.S. Department of Energy, simply changing the filter at the appropriate interval can improve the system’s efficiency by that amount! This is thanks to the fact that dirty furnace filters prevent a steady stream of air from passing through the system and into your living space.

A clean filter will allow the furnace to work as designed. In contrast, a dirty filter will tax the system, forcing it to work much harder than it should have to. In the end, switching out your old filter for a new one has the potential to save you hundreds of dollars every year. Those are some serious savings!

Changing your furnace filter will also improve the quality of your indoor air. If you leave a clogged filter in place, it will make it difficult to trap additional dust, grime, and other unsavory particles. As a result, some of those nasty particles will make their way through your air ducts and into your home’s air.

It is also important to consider the fact that a dirty furnace filter increases the odds of a repair. Since dirty filters force the system to work much harder than it should, the furnace will endure extensive wear and tear. This heightens the chances of a breakdown and consequential repair. Add in the fact that an overtaxed furnace won’t last nearly as long as it should and it is easy to see why some homeowners switch out their system’s filter once per month just to be on the safe side.

What’s the big deal with changing your furnace filter?

Changing your furnace filter is one of the simplest and most effective ways of improving your indoor air quality and comfort while lowering your heating expenses. It is an important part of your Furnace Maintenance. Here are a few reasons why changing your furnace filter is so important:

  • Dirty air filters are the leading cause of furnace system failures. This is because a clogged filter will restrict the airflow to your furnace system’s air handler, placing an added strain on the handler’s fan motor. Over time, this could result in motor burnout, system overheating or even failure. Investing the time in changing your filter can prevent this from happening and protect your expensive climate-control equipment.
  • Dirty air filters cause your fan motor to work harder than necessary and use up more energy. Changing your furnace filter can significantly reduce your spending.
  • Dirty air filters reduce your indoor air quality, which will aggravate allergies and promote sickness.
  • Dirty air filters cause your furnace systems and ducts to become clogged or dirty faster, leading to costly expenses and a decreased life span.
  • Take a moment to learn more about Furnace Maintenance in one of our previous blogs.

Your furnace filters should be checked every month, especially during winter and summer when your system is used the most. At a minimum they should be changed every three months. In order to help you remember when to replace it, try putting a monthly reminder on your Outlook calendar and change it on that same day each month.  This way it is more likely to become a habit and may help you to remember to have extra furnace filters on hand so you’ll be sure to have them when you need them.

Furnace Filter Brooklyn Center | All Climate Mechanical | Trusted Rheem Contractor

Give us a call at 763-548-8095 for emergency service or to schedule a visit from an All Climate Mechanical Technician for your Furnace Filter Brooklyn Center.

Home Furnace Safety | Carbon Monoxide Brooklyn Park | All Climate Mechanical

Carbon Monoxide Brooklyn Park is an odorless and invisible threat for Minnesotans. The Minnesota Department of Health recently reported that accidental carbon monoxide poisonings peak in winter.  Carbon monoxide is a by-product of improper combustion, so if your furnace uses natural gas and it isn’t functioning properly, it could be producing carbon monoxide and venting it into your business or home.

Whatever your heating source, make sure you get an inspection and install a carbon monoxide detector within 10 feet of every bedroom in your home or apartment. Don’t hesitate to call All Climate Mechanical with any concerns about you furnace or possible Carbon Monoxide Brooklyn Park concerns.

What is Carbon Monoxide?

Carbon monoxide is often referred to as CO, which is the chemical symbol. Unlike many gases, CO has no odor, color, taste and it does not irritate your skin. CO gets into your body when you breathe. If you inhale a large amount of CO, your body begins to replace oxygen in your blood with CO. When your body does not get enough oxygen, your tissues break down and eventually death occurs.

Carbon Monoxide can be found in your home, camper, cabin and at work. CO is produced by appliances fueled with natural gas, liquefied petroleum (LP gas), oil, kerosene, coal, or wood. Burning charcoal and running vehicles also produce CO.

Every year over 200 people are unintentionally poisoned by carbon monoxide causing their death. Several thousand people go to hospital emergency rooms for treatment of CO poisoning. The initial symptoms of CO poisoning are similar to the flu, but without the fever. They include headache, fatigue, shortness of breath, nausea and dizziness.

How to Prevent Carbon Monoxide Brooklyn Park Poisoning

  • Visit  the All Climate Mechanical Furnace Maintenance page on this site.
  • Make sure appliances are installed according to the manufacturer’s instructions and local building codes.
  • Have heating systems inspected and serviced annually.
  • Install a CO detector/alarm. This is not a substitute for the proper use and upkeep of appliances. Install a CO detector in the hallway near every separate sleeping area of the home.
  • Do not cover the detector with furniture or draperies.
  • Never burn charcoal inside your home, garage, vehicle or tent.
  • Never use portable fuel-burning camping equipment inside a home, garage, vehicle or tent.
  • Never leave a vehicle running in an attached garage, even with the garage door open.
  • Never service fuel-burning appliances without proper knowledge. Refer to the owner’s manual.
  • Never use gas appliances such as ranges, ovens, or clothes dryers for heating your home.

All Climate Mechanical is a CenterPoint Energy Trade Ally. We can help your home remain safe from Carbon Monoxide Brooklyn Park. Visit the CenterPoint Energy website for more information about Carbon Monoxide Safety

Carbon Monoxide Brooklyn Park | All Climate Mechanical | Carbon Monoxide Poisoning

Give us a call at 763-548-8095 for emergency service or to schedule a visit from an All Climate Mechanical Technician for your Carbon Monoxide Brooklyn Park testing.

Furnace Filters Brooklyn Park | All Climate Mechanical | Furnace Maintenance Brooklyn Park

Consistently changing Furnace Filters Brooklyn Park on a regular basis is the easiest way to keep your furnace working efficiently. You may be stunned to understand this, yet lots of homeowners aren’t sure how you can locate or change their furnace or Ac unit (AC) filter. This short article was developed to respond to the following concerns:

  • Exactly what does my heater or A/C filter do?
  • How you can I locate my heating system filter or Air Conditioning filter?
  • How do I tell what size or kind of furnace or air conditioner filter to purchase?
  • Now that I have a new furnace filter, how do I change it?

Exactly what is the function of the Furnace Filters Brooklyn Park and what does it do?

The filter used for a conventional residential Heating Air flow and also Air Conditioning (HVAC) systems was initially created to safeguard your house’s heating and cooling devices, yet not always to cleanse the air you take a breath.

Air in a residence is drawn right into the return ductwork by your system’s blower fan to be heated up by the heating system warmth exchanger or cooled by the air conditioner’s evaporator coil. The filter, which is placed in the return ductwork, filterings system all the air pulled with the system prior to it can be found in call with expensive elements of the HEATING AND COOLING system. Even a reduced efficiency fiberglass panel filter will certainly remove adequate particulates to make certain the warm exchanger or A/C coil will not become excessively dirty or damaged by larger bits of particles that get in the return.

A filter modification is a good idea at least every 1-3 months relying on the sort of filter. Certain problems in your home will substantially include fragments to the air, which will create the filter to capture even more fragments and also shorten its performance. Unclean duct work, family pets, building work, sanding tasks, cigarette smoke, melting candle lights, fire places as well as wood-burning cook tops can all possibly shorten the lifespan of your air filter. Your Furnace Filters Brooklyn Park is part of a larger system including your homes Insulation and Ventilation.

How to I locate my furnace filter or air conditioner filter?

If you remain in a new home or you have actually never changed your filter before, after that the very best place to start trying to find your air filter is by checking your mechanical space. A mechanical space is where all your cooling and heating devices lives. It can be located in a storage room, cellar, or perhaps the attic. The easiest means to locate your “mechanical room” is by transforming the fan setup on your thermostat to the “on” setting. Pay attention for the sound of your system’s fan and also follow it to its beginning.

You might not have a thin 1″ filter. If this applies to you, after that your heater makes use of a “media” filter, which suits a thick air cleaner room. In most cases, air cleaner cabinets have a filter that’s much thicker or wider than the standard 1″ slot.

How do I tell what size or kind of furnace or air conditioner filter to purchase?

The simplest means to tell just what type of filter you have is to search for a component number or dimension presented someplace on the filter. Most suppliers will certainly place their part number or nominal size outside of the filter for very easy identification. Keep in mind: The make, version number or identification number of your heater, air conditioning system, or air handler does NOT supply much beneficial details on the proper substitute filter.

If you can’t locate a filter component number or nominal measurements published on the filter, then utilize a measuring tape and tape-record the exact dimension of the filter you are attempting to change.

Find the length, the size, and the thickness. Filters are generally detailed at a nominal size, which is basically a rounded-up number. A manufacturer could print 20″ x 25″ x 1″ on a filter, yet in actuality the filter actually measures 19 1/2″ x 24 1/2″ x 7/8″ with a tape measure. It is typical for a filter to be damaged approximately 1/2″ from the small dimension. Visit our Air Filters Page on our web site. Over the years we have had the opportunity to use and replace thousands of air filters by many various manufacturers.

Now that I have a new furnace filter, how do I change it?

Note: Before changing your filter, you need to turn the power OFF to the heating system or air trainer. When an air filter is transformed a significant amount of dust can be removed, which means it’s possibly best if you don’t have your system fan running mid-change considering that all that debris can be straight drawn right into your COOLING AND HEATING system.

A lot of filters are made as if they can just be put one method into their slot or air cleaner cupboard. Usually, a stiff scrim or wire mesh is placed on the downstream side of the filter to give the filter the toughness and also rigidness it needs to do its task appropriately. The downstream side of the filter is the last surface the air touches and also should deal with the blower of your HEATING AND COOLING system.

There ought to be an air circulation arrow on your air filter that will certainly reveal you which direction the filter ought to be put. The act of altering your air filter should be as basic as gliding the old one out and sliding a new one in its area. You could have to get rid of a port cover or air cleaner door on some COOLING AND HEATING systems.

Furnace Filters Brooklyn Park | Heating Service Brooklyn Park | All Climate Mechanical

Give us a call at 763-548-8095 and schedule a visit from an All Climate Mechanical Technician for your Furnace Filters Brooklyn Park!