Heating in Coon Rapids MN | How to Get your Furnace Winter-Ready
Check your Thermostat
Before winter hits, it’s important to test your thermostat and make sure it’s working properly. The first step is to make sure your thermostat is set to the current temperature in your home. Then, check the batteries on your thermostat. If they’re dead, replace them with new AAA batteries (or whatever type your thermostat uses). Check out All Climate Mechanical today for all your Heating in Coon Rapids MN needs.
Change your furnace filter
While it’s easy to forget, changing your furnace filter can greatly improve the heating in your home. Running your furnace with a dirty filter can result in higher energy costs and lower air quality. It’s also important to change your filter before winter hits so that it doesn’t have time to get even dirtier before you put it back in!
Clean around the furnace
Your furnace can get dirty and clogged with debris over time. Cleaning around the furnace will help ensure that it’s working properly and efficiently, which will save you money on your energy bills. Making sure the area around your furnace is clean means that you have to worry about cleaning or replacing your filter less often. All the dirt and debris that would normally get sucked into your furnace through your filter will instead by taken care of.
Make sure pests aren’t nesting in or near your furnace
If you have a furnace that’s located in the basement, then you may have pests living around it. Rodents and other insects can get into your home through small holes in the walls, so make sure there aren’t any openings where they can enter! Not only could these holes continue to let in pests, they can also allow drafts into your home. You should also check all of your vents to make sure they’re secure and not allowing pests into your home.
Make sure pets aren’t allowed near the furnace
The other critters you should worry about when it comes to your furnace is your pets. Pets like to cozy up in the winter just like you do! If you have a dog or cat, then make sure they’re not near your furnace or vents. It’s especially important to keep pets away in the winter because they can get burned by touching things that are still hot. If they’ve gotten used to sleeping near a furnace in the summer, then it’s best to move them before winter hits.
Find your furnace’s shutoff valve
The last thing you want to worry about is your furnace breaking down in the middle of winter. One way to prevent that from happening is by knowing where your shutoff valve is located. The shutoff valve will be easy to spot because it’s usually near the furnace itself. If you can’t find it, then make sure you know where all of your home’s water lines are and what their purpose is before calling a professional out for some extra help.
Insulate your pipes
Pipes are a common point of failure in your home’s heating system. If you want to keep your furnace running smoothly year-round, then make sure you insulate the pipes that run throughout your home. This can be done by wrapping them with foam or fiberglass insulation and covering it with a layer of plastic. The insulation will help keep heat from escaping outside while also preventing any cold air from entering into your home.
Turn off outside faucets and cover hose bibs
If you have an outdoor faucet, then make sure it’s turned off. If you don’t have one, then cover your hose bibs to keep them from freezing over. This will prevent water from leaking and causing damage to your home if the pipes burst. When winter arrives, you’ll want to make sure that no part of your home is put under and extra stress.
Install a programmable thermostat
A programmable thermostat is an affordable way to keep your home at a comfortable temperature. You can set it so that the heat or air conditioning comes on before you arrive home from work, or when you wake up in the morning. This will save both money and energy while keeping your home warm and cozy during those cold winter months. In addition, a programmable thermostat can help the longevity of your furnace by giving it breaks throughout the day.
Set up a preventative maintenance plan with an experienced HVAC contractor
A good HVAC contractor will help you set up a preventative maintenance plan for your furnace. This can include regular checkups to ensure that everything is working properly, as well as replacing parts before they fail so that you don’t have to deal with an unexpected emergency situation. Nothing is worse than an emergency hitting in the middle of winter when you need heat most furnace installation
If you still have any questions after reading this article, always consult your local HVAC professional. We are All Climate Mechanical, serving our Coon Rapids, Minnesota Community. We’re always happy to help so give us a call today!
Be the first to start a conversation