What you’ll Need to Heat your Home this Winter

Most people want to be able to relax as it gets cold outside and know that they will be warm and comfortable when they are inside. If you’d like to find a New Furnace in Mounds View MN, then reach out to All Climate Mechanical today for all your needs! In order to be warm and comfortable in your living space there are a few things you will need:

A heat source, such as a furnace, boiler or fireplace.

Controls such as thermostats or timers.

An energy source such as gas or electricity.

Insulation to help keep the warm air inside your home.

Weather-stripping, caulk and/or insulation around doors and windows to keep cold air out.

Below, we’ll describe the different types of heat sources, and the pros and cons of each of them.

Types of Furnaces

Air Source Heat Pumps

An air source heat pump is a great way to heat your home because it can be more efficient than other types of furnaces. It works by extracting heat from the outside air and transferring it into your home through an indoor coil and a refrigerant fluid that’s circulated between the two.

Boilers

A boiler is a type of furnace that burns fuel to create hot water. The hot water is used to heat your home, but it also uses up energy in the process. Boilers are typically more expensive than other types of furnaces because they require more maintenance and repair over time. Many older homes are heated with boilers, but newer homes are more likely to have other types of furnaces. If you’re wondering whether to install a boiler or another type of furnace in your home, talk with a local furnace expert at a company like All Climate Mechanical for help today.

Condenser-Based Systems

Condenser-based systems are the most common type of heat pump. They’re also sometimes called “reverse cycle” systems because they use electricity to generate heat for your home. The air outside is cooler than the air inside, so a condenser uses this difference in temperature to create hot water. Then, that hot water is pumped through your ductwork to warm up your home.

Ductless Mini-Split Furnaces

Ductless mini-split systems are another common type of heat pump. These systems use a small outdoor unit, or “splitter,” to generate heat, and they’re often paired with an indoor air handler that provides cooling as well as heating. This makes them more efficient than other types of heat pumps, since you can use one system for both cooling and heating your home in some cases!

Electric Furnaces

Electric furnaces are another common type of heat pump. They use electricity to generate heat, although they can be paired with a backup gas-powered blower that kicks on when the power goes out so you still have warm air! This is especially useful in climates that are prone to extreme cold in the winter. You may also hear the term “condenser” used when discussing heat pumps. This is a device that’s attached to the outside of a heat pump, and it helps transfer heat from inside your home out into the atmosphere. Some condensers can be quite large and noticeable, but others are small enough that they’re barely noticeable!

Gas Furnaces

Gas furnaces are the most common type of furnace and the most popular choice for homeowners. They use natural gas, propane or oil to generate heat, which is then pushed into your home through vents. This is a great option if you want a simple system that doesn’t require much maintenance—but it’s also more expensive than other types of heat pumps!

Geothermal Heating and Cooling Systems

Geothermal systems use the ground as a heat source or heat sink. They pump water from a well and then circulate it through pipes buried underground. The pipes are placed in trenches that are usually about 10 feet deep and filled with gravel (or other material like crushed stone) to prevent freezing. The water warms as it circulates through the pipes and is then used to heat your home, cool it or both. The system works well in areas that have a lot of cold winters because the ground stays at a fairly constant temperature all year long— usually between 45 and 55 degrees F. You’ll also see geothermal systems used in central air conditioning units, where they help cool the house by running water through underground pipes.

At All Climate Mechanical, we’d be happy to help you with Furnace Replacement, Roof Top Heating Units, Residential Heating, Thru-the-Wall Systems, Ductless Split Systems, Thermostats and Controls, Preventative Maintenance, and more! If you still have any questions after reading this article, always consult your local HVAC professional. We’re always happy to help so give us a call today! 

New Furnace in Mounds View MN

New Furnace in Mounds View MN

New Furnace in Mounds View MN

New Furnace in Mounds View MN