Furnace Maintenance Brooklyn Center | Furnace Tune-Up Brooklyn Center

If you’re like most people, you hardly ever think about your home’s furnace. As long it keeps cranking out the heat all winter long, you’re happy to live in blissful ignorance of its inner machinations. And why not? Modern furnaces are quite reliable. Especially when compared to the groaning, fire-breathing behemoths of yesteryear. But did you know that routine post-winter Furnace Maintenance Brooklyn Center can prolong the life of your furnace and ensure it continues to run as efficiently as it did when it was brand new? Another benefit is that CenterPoint Energy offers efficiency Programs & Rebates for residential and commercial customers.

The average American home spends about 2.7% of their income on energy bills. That’s approximately $2,000 a year. This cost can be reduced by utilizing proper maintenance techniques and doing checks at the right times of year. As your primary heating and cooling system, your furnace requires routine maintenance before spring and winter to make sure it’s prepared to handle the change of season. Below are some easy tips on how to treat your furnace after a long hard winter spent keeping you and your family cozy and warm.

Keep Your Air Ducts Clean

Dirty, clogged air ducts not only hurt the efficiency of your furnace, they can also be tough on you and your family’s lungs, leading to health problems. This is especially true for people who have asthma or issues with allergies. Spring is great time to inspect ducts for dust and debris that can choke up you and any furnace system system. And if you do find your home has ducts that need cleaning, it’s best to rely on experienced professionals to carry out the work. Both you and your furnace will breathe easier because of it!

Check the Furnace’s Belts and Filter

Belts are responsible for running the blower on your furnace, so it’s a good idea to make sure that they are tight and properly aligned. Check the belts for wear and be prepared to change them if you see significant cracking or thinning. Clean off any dust and debris around the belts and fan blades.

Your furnace’s filter is an essential component of the system and it must be clean to function properly. Check the furnace filter for dirt and debris and if you can’t see through it, it’s time to replace it with a clean new one. The general rule is to replace the filter every six months. As with other components of your heating system, if you are unsure of how to perform filter maintenance, it’s a good idea to have a professional take a look at it.

Make Sure Your Thermostat Is in Good Working Order

It may seem obvious, but if the brain of your heating system isn’t working properly, then the system as a whole cannot function effectively. In the case of your furnace, the thermostat is the brain. According to the U.S. Department of Energy simple and inexpensive actions can help you save energy and money during the warm spring and summer months.

If you have an electric thermostat, as many people now do, check the battery every spring to make sure it isn’t dying. A fading battery will cause temperature fluctuations that will in turn cause inefficiencies along the whole system. Changing out the battery each spring will keep feeding the furnace accurate information, making sure everything keeps running as efficiently as possible.

Looking for a professional tune-up or Furnace Maintenance Brooklyn Center?

After the long winter, spring is a great time to have the experienced team at All Climate Mechanical inspect your furnace systems. With regular maintenance, you’ll be making sure your air furnace lasts longer and runs more efficiently to save you money in all year. Plus, you’ll save more with regular tune-ups and maintenance than you would be paying for a major repair. Don’t forget to inquire about our Preventative Maintenance program to ensure the best performance of your home heating system.

Furnace Maintenance Brooklyn Center | All Climate Mechanical | Trusted Rheem Contractor

Give us a call at 763-548-8095 for emergency service or to schedule a visit from an All Climate Mechanical Technician for your Furnace Maintenance Brooklyn Center needs.

All Climate Mechanical | Furnace Inspection Brooklyn Center

Furnace Inspection Brooklyn Center with All Climate Mechanical. We provide fast, effective tune-ups and inspections for all makes and models.

Spring may not be far off but its not here yet. With 4+ inches of snow this week and another 6+ inches this weekend the cold and snow are becoming a bit old. That’s just par for the course during an average Minnesota winter.

Many homeowners don’t think about their furnace for much of the year, only to be frustrated when they go to turn it on in the fall and find a problem. Sometimes they don’t realize a furnace inspection is needed until the middle of winter.  All Climate Mechanical can help you avoid this situation with our Furnace Inspection Brooklyn Center.

Regular furnace maintenance is essential to ensuring that your system works correctly when you need it. By getting a professional inspection from our expert technicians, you can be sure that you don’t need any major repairs or replacement.

What to expect from your furnace maintenance appointment

A furnace requires annual service and maintenance to make sure it performs as it should. Even if your furnace appears to be working properly, it’s smart to schedule a Furnace Inspection Brooklyn Center appointment. The furnace inspection and maintenance work performed by one of our experienced HVAC technicians will ensure safe, efficient operation and help prolong the life of your heating system.

The checklist for a typical furnace service will include the following work

  • Furnace Service – Prep for peak performance. Annual furnace service is the best way to ensure reliable, efficient performance after your system isn’t used in the summer. Your furnace is part of a larger system including your homes Insulation and Ventilation. The importance of regular maintenance has many rewards.
  • Visual Inspection – Your technician will check not only the furnace, but also the fuel line, flue pipe, main plenum and ductwork.
  • Combustion Safety – It’s important to make sure that your furnace is venting correctly, with no danger of combustion gases getting into your living space.
  • Filter Check – A dirty filter will be replaced or cleaned. When air filters become clogged with dirt, dust, pet dander and other particulates, air flow is reduced and system efficiency plummets. The HVAC tech will also confirm proper filter size and type. Filters should be replaced or cleaned at least every other month. More often if the family has pets or a remodeling project underway. Visit our Air Filters Page to learn more about the importance of air filters.
  • Furnace Cleaning – Removing carbon, soot and other combustion byproducts from the burner and combustion chamber helps to promote more efficient operation.
  • Blower Check – By listening to your system’s blower and performing a visual inspection, your HVAC specialist will be able to determine if there’s a bearing or balance problem.
  • System Check – Part of the service includes running the furnace and blower to confirm that the thermostat is working correctly, and that warm air is being delivered to your living space.
  • Occupant Issues – Let your technician know if certain parts of the house are colder or draftier than others. Our experts are trained to identify other factors that affect home comfort and energy efficiency. Even if your furnace is working perfectly, your house may have insulation, air leakage or ductwork conditions that impact comfort and energy efficiency (see sidebar).

If you’ve had any issues with your heating system, All Climate Mechanical can provide you with the right furnace solutions for your needs. We service all types of systems, and we can keep your furnace running optimally whenever you need it. We can adjust to your homes needs over time from heating service replacement and repair to cooling service replacement and repair.

All Climate Mechanical is a trusted Rheem Contractor. Call or contact us online to get an estimate on any of our heating services. We provide expert furnace maintenance in Brooklyn Center, Brooklyn Park, Fridley, Blain, Coon Rapids, Spring Lake Park, and the rest of the Twin Cities Metro Area.

Furnace Inspection Brooklyn Center | All Climate Mechanical | Trusted Rheem Contractor

Give us a call at 763-548-8095 for emergency service or to schedule a visit from an All Climate Mechanical Technician for your Furnace Inspection Brooklyn Center.

Furnace Filter Brooklyn Center | Heating Service Brooklyn Center | All Climate Mechanical

Furnace Filter Brooklyn Center and why it matters to keep it clean. With spring starting on the 20th of March this year its time to look at a few inexpensive furnace maintenance tips. Would you like to increase your furnace efficiency by up to 15 percent? According to the U.S. Department of Energy, simply changing the filter at the appropriate interval can improve the system’s efficiency by that amount! This is thanks to the fact that dirty furnace filters prevent a steady stream of air from passing through the system and into your living space.

A clean filter will allow the furnace to work as designed. In contrast, a dirty filter will tax the system, forcing it to work much harder than it should have to. In the end, switching out your old filter for a new one has the potential to save you hundreds of dollars every year. Those are some serious savings!

Changing your furnace filter will also improve the quality of your indoor air. If you leave a clogged filter in place, it will make it difficult to trap additional dust, grime, and other unsavory particles. As a result, some of those nasty particles will make their way through your air ducts and into your home’s air.

It is also important to consider the fact that a dirty furnace filter increases the odds of a repair. Since dirty filters force the system to work much harder than it should, the furnace will endure extensive wear and tear. This heightens the chances of a breakdown and consequential repair. Add in the fact that an overtaxed furnace won’t last nearly as long as it should and it is easy to see why some homeowners switch out their system’s filter once per month just to be on the safe side.

What’s the big deal with changing your furnace filter?

Changing your furnace filter is one of the simplest and most effective ways of improving your indoor air quality and comfort while lowering your heating expenses. It is an important part of your Furnace Maintenance. Here are a few reasons why changing your furnace filter is so important:

  • Dirty air filters are the leading cause of furnace system failures. This is because a clogged filter will restrict the airflow to your furnace system’s air handler, placing an added strain on the handler’s fan motor. Over time, this could result in motor burnout, system overheating or even failure. Investing the time in changing your filter can prevent this from happening and protect your expensive climate-control equipment.
  • Dirty air filters cause your fan motor to work harder than necessary and use up more energy. Changing your furnace filter can significantly reduce your spending.
  • Dirty air filters reduce your indoor air quality, which will aggravate allergies and promote sickness.
  • Dirty air filters cause your furnace systems and ducts to become clogged or dirty faster, leading to costly expenses and a decreased life span.
  • Take a moment to learn more about Furnace Maintenance in one of our previous blogs.

Your furnace filters should be checked every month, especially during winter and summer when your system is used the most. At a minimum they should be changed every three months. In order to help you remember when to replace it, try putting a monthly reminder on your Outlook calendar and change it on that same day each month.  This way it is more likely to become a habit and may help you to remember to have extra furnace filters on hand so you’ll be sure to have them when you need them.

Furnace Filter Brooklyn Center | All Climate Mechanical | Trusted Rheem Contractor

Give us a call at 763-548-8095 for emergency service or to schedule a visit from an All Climate Mechanical Technician for your Furnace Filter Brooklyn Center.

Furnace Filters Brooklyn Park | All Climate Mechanical | Furnace Maintenance Brooklyn Park

Consistently changing Furnace Filters Brooklyn Park on a regular basis is the easiest way to keep your furnace working efficiently. You may be stunned to understand this, yet lots of homeowners aren’t sure how you can locate or change their furnace or Ac unit (AC) filter. This short article was developed to respond to the following concerns:

  • Exactly what does my heater or A/C filter do?
  • How you can I locate my heating system filter or Air Conditioning filter?
  • How do I tell what size or kind of furnace or air conditioner filter to purchase?
  • Now that I have a new furnace filter, how do I change it?

Exactly what is the function of the Furnace Filters Brooklyn Park and what does it do?

The filter used for a conventional residential Heating Air flow and also Air Conditioning (HVAC) systems was initially created to safeguard your house’s heating and cooling devices, yet not always to cleanse the air you take a breath.

Air in a residence is drawn right into the return ductwork by your system’s blower fan to be heated up by the heating system warmth exchanger or cooled by the air conditioner’s evaporator coil. The filter, which is placed in the return ductwork, filterings system all the air pulled with the system prior to it can be found in call with expensive elements of the HEATING AND COOLING system. Even a reduced efficiency fiberglass panel filter will certainly remove adequate particulates to make certain the warm exchanger or A/C coil will not become excessively dirty or damaged by larger bits of particles that get in the return.

A filter modification is a good idea at least every 1-3 months relying on the sort of filter. Certain problems in your home will substantially include fragments to the air, which will create the filter to capture even more fragments and also shorten its performance. Unclean duct work, family pets, building work, sanding tasks, cigarette smoke, melting candle lights, fire places as well as wood-burning cook tops can all possibly shorten the lifespan of your air filter. Your Furnace Filters Brooklyn Park is part of a larger system including your homes Insulation and Ventilation.

How to I locate my furnace filter or air conditioner filter?

If you remain in a new home or you have actually never changed your filter before, after that the very best place to start trying to find your air filter is by checking your mechanical space. A mechanical space is where all your cooling and heating devices lives. It can be located in a storage room, cellar, or perhaps the attic. The easiest means to locate your “mechanical room” is by transforming the fan setup on your thermostat to the “on” setting. Pay attention for the sound of your system’s fan and also follow it to its beginning.

You might not have a thin 1″ filter. If this applies to you, after that your heater makes use of a “media” filter, which suits a thick air cleaner room. In most cases, air cleaner cabinets have a filter that’s much thicker or wider than the standard 1″ slot.

How do I tell what size or kind of furnace or air conditioner filter to purchase?

The simplest means to tell just what type of filter you have is to search for a component number or dimension presented someplace on the filter. Most suppliers will certainly place their part number or nominal size outside of the filter for very easy identification. Keep in mind: The make, version number or identification number of your heater, air conditioning system, or air handler does NOT supply much beneficial details on the proper substitute filter.

If you can’t locate a filter component number or nominal measurements published on the filter, then utilize a measuring tape and tape-record the exact dimension of the filter you are attempting to change.

Find the length, the size, and the thickness. Filters are generally detailed at a nominal size, which is basically a rounded-up number. A manufacturer could print 20″ x 25″ x 1″ on a filter, yet in actuality the filter actually measures 19 1/2″ x 24 1/2″ x 7/8″ with a tape measure. It is typical for a filter to be damaged approximately 1/2″ from the small dimension. Visit our Air Filters Page on our web site. Over the years we have had the opportunity to use and replace thousands of air filters by many various manufacturers.

Now that I have a new furnace filter, how do I change it?

Note: Before changing your filter, you need to turn the power OFF to the heating system or air trainer. When an air filter is transformed a significant amount of dust can be removed, which means it’s possibly best if you don’t have your system fan running mid-change considering that all that debris can be straight drawn right into your COOLING AND HEATING system.

A lot of filters are made as if they can just be put one method into their slot or air cleaner cupboard. Usually, a stiff scrim or wire mesh is placed on the downstream side of the filter to give the filter the toughness and also rigidness it needs to do its task appropriately. The downstream side of the filter is the last surface the air touches and also should deal with the blower of your HEATING AND COOLING system.

There ought to be an air circulation arrow on your air filter that will certainly reveal you which direction the filter ought to be put. The act of altering your air filter should be as basic as gliding the old one out and sliding a new one in its area. You could have to get rid of a port cover or air cleaner door on some COOLING AND HEATING systems.

Furnace Filters Brooklyn Park | Heating Service Brooklyn Park | All Climate Mechanical

Give us a call at 763-548-8095 and schedule a visit from an All Climate Mechanical Technician for your Furnace Filters Brooklyn Park!